Materials for valve castings

Apr 06, 2025

Common materials for valve castings include gray cast iron, ductile iron, malleable cast iron, carbon steel and stainless steel. These materials each have their own characteristics and applicable scope.

Gray cast iron
Gray cast iron has good casting performance, wear resistance and shock absorption, and is suitable for media such as water, steam, air, gas and oil with a nominal pressure of PN≤1.0MPa and a temperature of -10℃~200℃. Common grades are HT200, HT250, HT300, HT350.

Ductile cast iron
Ductile cast iron is made of spherical graphite through a special treatment process, which significantly improves the comprehensive performance of the material. It is suitable for media such as water, steam, air and oil with a nominal pressure of PN≤4.0MPa and a temperature of -30℃~350℃. Common grades are QT400-15, QT450-10, QT500-7.

Malleable cast iron
Malleable cast iron has good plasticity and corrosion resistance, and is suitable for media such as water, steam, air and oil with a nominal pressure of PN≤2.5MPa and a temperature of -30℃~300℃. Common grades are KTH300-06, KTH330-08, KTH350-10.

Carbon steel
Carbon steel is suitable for media such as water, steam, air, hydrogen, ammonia, nitrogen and petroleum products with a nominal pressure of PN≤32.0MPa and a temperature of -30℃~425℃. Common grades are WC1, WCB, ZG25 and high-quality steel 20, 25, 30 and low-alloy structural steel 16Mn.

Stainless steel
Stainless steel is suitable for various corrosive media, and common grades are CF8 (304 stainless steel), CF8M (316 stainless steel), CF3 (304L stainless steel), CF3M (316L stainless steel).

The selection of these materials is mainly based on the operating conditions of the valve, including the type of media, temperature range and pressure level. For example, carbon steel is suitable for high pressure and high temperature environments, while stainless steel is suitable for corrosive media. Choosing the right material can ensure the performance and life of the valve.